MIL-W-21993 Wire Rope Assembly, Mooring, Mark 1 Mod 1

Pages 1 - 2 - 3 - 4 - 5 - 6

MIL-W-21993B(OS)

DL 2424109

Container Unit-Wire Rope Mark 1

Type Assembly.

2428610

Wire Rope Assembly, Mooring, Mark 1, Mod 1

All drawing numbers referenced herein are listed on LD 549741 unless

othemise designated.

PUBLICATIONS

NAVAL SEA SYSTEMS COMMAND

Code Ident 10001)

OD 10511

Nonmagnet ic Testing with the Test

Set Mark 115 Mod 4 & 5

(Copies of specifications, standards, drawings and publications

required by contractors in connection with specific procurement functions

should be obtained from the procuring activity or as directed by the

contracting

officer).

2.2 Other publication, The following document forms a part of this

specification to the extent specified herein. Unless otherwise indicated,

the issue in effect on the date of invitation for bids or request for proposal

shall apply.

NATIONAL BUREAU OF STANDARDS PUBLICATION

HANDBOOK H28

Screw-Thread Standards for Federal

Services

(Application for copies should be addressed to the Superintendent of

Documents Government Printing Office, Washington, D. C. 20402).

3� REQUIREMENTS

3.1 Description. The Wire Rope Assembly, Mooring, Mark 1 Mod 1, is

a nonmagnetic, phosphor bronze, two-component cable with the necessary fittings

to attach the cable for end use.

3.2 First article sample Unless otherwise specified in the contract

or order, (see 6.2) a first article sample of five wire rope assemblies shall

be manufactured and prepared for delivery using the methods and procedures

proposed for the production lot. The sample shall be prepared for delivery

in accordance with section 5 herein and will be tested for approval as

specified in section 4 herein. the sample is for the purpose of determining

that, prior to starting production, the contractor's production metbods are

capable of producing items that comply with this specification and the

design and my be waived by the contracting officer if satisfctory production

has been recently accomplished.

3.3

General requirement

3.3.1 Fabrication, The wire rope assembly shall be manufactured in

accordance with ID 549741 and as specified herein.