An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Underwater Mine Inert Components Mil-Specs - FSC 1350

MIL-A-21672 - Arming Cell Mark 2 Mods 1 And 2

This specification establishes the requirements for the procurement of the Arming Cell Mark 2 Mod 1 and Mod 2. The arming cell is a delay-arming device for use on clock starters and for linited use on extenders in place of soluble washers. Electrolytic action between a zinc disk and a cup of silver chloride, arising from sea water immersion, causes the disk to deteriorate until it breaks and releases the piston of the clock starter or extender.

MIL-A-21942 - Anchor, Underwater Mine, Mark 56 Mod 0

MIL-A-22696 - Anchor, Underwater Mine, Drill, Mark 56 Mod 1

MIL-A-23773 - Anchor, Underwater Mine, Mark 56 Mod 4 And Mod 5

This specification establishes the requirements for the procurement of the Anchor, Underwater Mine, Mark 56 Mod 4 and Mod 5, 549694 and 549718. They are of one type and one class.

MIL-B-18544 - Booster Cans(For Booster Mark 8 And Mark 12)

This specification covers the requirements for booster cans for Boosters Mk 8 and Mk 12, which are used in the Mk 8 Mod 3 Flexible Linear Demolition Charge.

MIL-C-1890 - Collars, Trukshead, Submarine Mine

MIL-C-21583 - Cs Mechanism Mark 1 Mods 3, 4, 9, And 11

This specification establishes the requirements for the procurement of the CS Mechanism Mark 1 Mods 3, 4, 9, and 11.

MIL-C-21585 - Clock Delay, Cd-4 Mod O Mechanism

MIL-C-21586 - Clock Delay, Cd-9 Mod 1 Mechanism

MIL-C-21667 - Cd-12 Mods-0 And 1 Mechanism

MIL-C-21676 - Mine Case Mark 36 Mod 2

MIL-C-21678 - Cd-8 Mod 0 Mechanism

This specification establishes the requirements for the procurement of the clock delay, CD-8 Mod 0 Mechanism. This mechanism which is used to control underwater mine circuits, is a manually-wound, spring-driven clock with three normally open switches, which close in sequence.

MIL-C-21679 - Clock Delay Cd-10 Mod 1 Mechanism

This specification establishes the requirements for the procurement of the clock-delay, CD-10 Mod 1 Mechanism. The mechanism, which is used to control underwater mine circuits, is a manually-wound, spring-driven clock with two normally open electrical switches which operate in sequence.

MIL-C-21941 - Cable Assembly, Ca-70, Ca-71, Ca-72, Ca-73, Ca-74, Ca-75, Ca-78, Ca-79, Ca-80, Ca-86 And Ca-87

MIL-C-22318 - Carrier, Mine, Mk 39 Mod 0

MIL-C-22731 - Cable, Controlled Mine

MIL-C-23331 - Cores For Search Coil Assemblies

This specification establishes the requirements for the procurement of cores and caps for use with Search Coil Assemblies.

MIL-D-22697 - Drill Section, Underwater Mine, Mark 1, Mod 0 (Empty)

MIL-E-22026 - Explosive Section, Underwater Mine, Mark 1 Mod 0 (Empty)

MIL-E-23477 - Explosive Fitting Mark 2 Mod 2

MIL-E-81162 - Explosive Section (Empty) Mark 9 Mod 0

MIL-F-21680 - Firing Mechanism K-4 Mods 0, 1 And 2

MIL-F-81100 - Float, Drill Mine, Mark 17 Mod 0

This specification covers the Float, Drill Mine, Mark 17 Mod 0, LD 486283. The float is of one type and one class.

MIL-F-9238 - Flight Control System, Target Aircraft, Remote, Type C-2

MIL-G-19515 - Gyro, Mark 39 Mod 0

MIL-G-82455 - Generator, Gas

This specification covers one type of Gas Generator referred to as the "Generator". See 6.1 for description of intended use.

MIL-I-1888 - Iron, Grappling, Submarine Mine

MIL-J-21994 - Junction Box Mark 43 Mod 0

This specification describes the requirements for the procurement of a Junction Box Mark 43 Mod 0, LD 291892. The Junction Box Mark 43 Mod 0 is of one type and of one class.

MIL-L-21943 - Lug, Hoisting, Underwater Mine, Mark 9 Mod 0

MIL-L-21992 - Lug, Suspension, Underwater Mine, Mark 8 Mod 0

This specification establishes the requirements for the procurement of the Lug, Suspension, Underwater Mine, Mark 8 Mod 0, Bureau of Ordinance Drawing No. 1276258.

MIL-M-17048 - Mine Case Mark 49 Mod 0

MIL-M-17181 - Mine Case Mark 10 Mod 8

MIL-M-17184 - Mechanisms Se-3 Mods 3 And 4

MIL-M-1883 - Mine, Cases, And Budys, Steel Submarine Mine

MIL-M-21124 - Mine Case Mark 25 Mod 1

This specification establishes the requirements for the procurement of a Mine Case Mark 25 Mod 1, Bureau of Ordnance LD No. 139306.

MIL-M-21145 - Md-9 Mod 3 Mechanism

MIL-M-22025 - Mechanism Compartment, Underwater Mine, Mark 1 Mod 0

MIL-M-22028 - Mine Case Mark 10 Mod 9 (Drill)

MIL-M-22029 - Mine Case Mark 10 Mod 7

MIL-M-22683 - Mine Test Set Mark 130 Mod 1

MIL-N-21945 - Nonmagnetic Requirements For Parts For Mines Mark 56 And Mark 57

This specification establishes the nonmagnetic requirements for procurement of parts (see 2.1) for the Mines Mark 56 and Mark 57.

MIL-P-21904 - Parachutes For Underwater Mines; General Specification For

This specification establishes the general requirements for the production of parachutes for use with underwater mines.

MIL-PRF-24002 - Parachute Packs; General Specification For

This specification covers parachute packs for use with underwater mines. These packs consist of aluminum alloy housings and covers in which ring slot type parachutes are stowed and retained in ready condition by ball-lock type pack openers.

MIL-PRF-24003 - Parachute Release Mechanisms; General Specification For

This specification covers parachute release mechanisms. These mechanisms arc intcndcd to provide an automatically rcleascd attachment for a parachute pack to an undcrwatcr mine or other weapon.

MIL-R-21335 - Relay, Polarized, Sensitive, Direct Current

MIL-R-21939 - Rack, Instrument, Mark 2 Mod 0

MIL-R-23777 - Release, Anchor, Drill Mine, Mark 25 Mod 0

MIL-S-21903 - Sd-4 Mod 1 Mechanism

MIL-S-21919 - Switch, Hydrostatic, Mark 42 Mod 0

This specification establishes the requirements for the procurement of the Switch, Hydrostatic, Mark 42 Mod 0, Naval Sea Systems Command LD 299450.

MIL-S-21920 - Switch, Hydrostatic, Mark 41 Mods 0 And 1

This specification establishes the requirements for the procurement of the Switch, Hydrostatic, Mark 41 Mods 0 and 1, Naval Sea Systems Command LD 299449 and PL 3212233, respectively.

MIL-S-21995 - Switch, Rotary, Ammeter, Voltmeter Selector, 115/200 Volts For 1, 2, Or 4 Generator System

MIL-S-23772 - Switch, Hydrostatic, Mark 63 Mod 0 And Mod 1

This specification covers the Switch Hydrostatic Mark 63 Mod 0, Bureau of Naval Weapons LD 479921 and Mark 63 Mod 1, Bureau of Naval Weapons ID 48490, for test and evaluation purposes.

MIL-S-81039 - Switch, Hydrostatic, Mark 110 Mod 0

This specification establishes the requirements for the procurement of Switch, Hydrostatic, Mark 110 Naval Ordnance Systems Command, LD 516069.